Pressure Washing in Cumming, GA

Pressure Washing in Cumming GA

Pressure washing, also known as power washing, is an extremely useful service for both residential and commercial properties in Cumming, Georgia. Using pressurized water allows for thorough cleaning and removal of dirt, grime, mold, mildew, and other debris from surfaces like driveways, sidewalks, decks, houses, buildings, and more. As a trusted pressure washing company in Cumming, we provide customized services to help restore and maintain properties.

Benefits of Pressure Washing

Pressure washing utilizes specialized equipment that shoots pressurized water out of a wand or nozzle. The pressure, which can range from 1500 to 4000 PSI, allows the water to dig into and dislodge messes that normal cleaning cannot. With the right nozzle, it can cleanly cut through layers of buildup.

Compared to manual scrubbing, pressure washing is far more efficient and effective. It saves hours of labor and gets surfaces cleaner than they have been in years. The pressurized spray can reach cracks, crevices, uneven terrain, high stories, and other hard-to-reach areas.

Beyond just saving time and effort, pressure washing provides health and safety benefits as well. Removing mold, mildew, moss, algae, pollen, dust mites, grease, vehicle fluids, pet waste, rodent droppings, and more eliminates sources of bacteria, allergens, irritants, and contaminants. It is practically a whole-property sanitization process.

For businesses, a fresh, clean appearance attracts more customers and makes a great impression. Stopping deterioration can also prevent costly repairs down the road.

Typical Pressure Washing Services

As a fully licensed, insured, and experienced company, we handle all kinds of pressure washing projects throughout Cumming and surrounding areas. Some of our most common services include:

Residential Pressure Washing

  • House Exteriors – Safely restore vibrancy to siding, stucco, brick, vinyl, and painted surfaces. Remove black streaks from roof runoff. Clean gutters and soffits.
  • Fences & Gates – Blasting away dirt, algae stains, cobwebs, etc. gives fences that “just installed” look.
  • Patios & Decks – Rejuvenate patio stone, concrete, pavers, tile, composite decks, and railings. Eliminate slippery moss and leaves.
  • Driveways & Sidewalks – Blast away oil drips, tire marks, weed growth, and other stains from concrete or asphalt. Increase curb appeal.

Commercial Pressure Washing

  • Storefronts & Office Buildings – Clean siding, window frames, awnings, signs, glass, and entryways. Help properties shine.
  • Warehouses & Manufacturing Plants – Remove unsightly dirt, residue, oil, rust stains, and paint drips. Reclaim wall space.
  • Restaurants & Hospitality – Clean dumpster areas, vents/exhausts, outdoor furniture, playgrounds, etc. Provide a better guest experience.
  • Shopping Centers & Strip Malls – Clean individual storefronts and joint-use areas like sidewalks. Draw more visitors.

Other Niche Pressure Washing

  • Roof Cleaning – Clear debris, moss, black streaks from algae, discoloration, and more. Extend roof life.
  • Graffiti Removal – Safely eliminate tagging, inappropriate images, and other vandalism from commercial buildings.
  • Gum Removal – Easily eliminate sticky gum from sidewalks, parking lots, store entryways, school grounds, etc.
  • Fleet Washing – Professional cleaning of company vehicles, trucks, vans, rigs, and heavy equipment.

Process of Pressure Washing

We follow best practices and methodical procedures refined over years in the power washing business. The basic process goes as follows:

  1. Site Evaluation
    • Discuss service options and desired outcome with customer
    • Inspect area(s) to be cleaned to determine necessary PSI, water usage, nozzle types, etc. Assess for risk factors
  2. Surface Preparation
    • Cover/protect nearby windows, vehicles, AC units, foliage, etc. with special shields
    • Clear loose debris like trash cans, potted plants, welcome mats, etc.
    • Pre-soak extremely dirty areas 15-30 minutes beforehand
  3. Pressure Wash
    • Start at top areas, working down methodically section by section
    • Adjust nozzle distance and angle as needed
    • Apply cleaning agents to stubborn areas during 2nd pass
  4. Post Wash Touch-ups
    • Hand scrub areas too delicate for pressure washing
    • Rinse away any remaining cleaning agent residue
  5. Clean-up & Containment
    • Control, contain, and legally dispose of all wastewater
    • Remove surface protections and return items to their original places
  6. Optional Protective Treatment
    • Apply protective treatments like sealers, water repellents, rust inhibitors, etc. if desired

Difference Between Pressure Washing and Soft Washing

While often used synonymously, pressure washing and soft washing refer to different cleaning methods:

Pressure Washing utilizes very high PSI levels (1500+ PSI) and hot water to essentially “power scrub” surfaces using the brute force of the pressurized spray. This works well for extremely dirty concrete, sturdy structures, industrial equipment, and metal surfaces. Pressure washing excels at general grime removal.

Soft Washing uses low PSI around 400-800 PSI and cold or warm water. Cleaning relies more on applying and rinsing specialized detergents and cleaning agents. The lower pressure makes soft washing ideal for delicate surfaces like roof shingles, wood siding, windows, canvas awnings, foliage, etc. It effectively eliminates mold, mildew, moss, oils, rust stains, and other niche contaminants.

As you can see, soft washing depends greatly on having the right formulations and knowing how to apply them correctly. It is as much an art as a science. Here at our pressure washing company, we use eco-friendly detergents designed specifically for different cleaning challenges. We know which ones work best for house washing vs concrete cleaning vs deck brightening and so forth.

Rest assured we always start with the gentlest method first before bringing in the big pressure washing guns. This balanced “one-two punch” allows us to tackle even the most seemingly impossible cleaning projects.

Eco-Friendly Pressure Washing

While incredibly useful, pressure washing does involve spraying a high volume of water at a property. Done improperly, this can overload storm drains or contaminate ground soil. We adhere to strict EPA regulations concerning containment and disposal of pressure wash runoff.

When possible, we use hot water pressure washing units with built-in containment tanks to recycle water onsite. For chemicals and detergents, we select the most environmentally-responsible options certified for safe usage. Your property gets an effective deep clean without any lingering chemical residue or environmental impact. It is the best of both worlds.

Scheduling Pressure Washing Service

Our Cumming GA pressure washing team services residential and commercial customers throughout Forsyth County. We have over 10 years of experience handling all types of pressure washing and exterior cleaning projects. Our skilled technicians undergo continued training on equipment best practices and cleaning agent innovations.

To schedule service at your Cumming area home or business, give us a call at (770) 500-4234 or contact us online. We provide free walkthrough evaluations and quotes. Let us revitalize your property with a thorough top-down pressure wash service in Cumming GA designed to meet your individual needs.

Don’t Stop Here

More To Explore

By contacting us, you open the door to a world of possibilities and collaboration. Whether you prefer to send us an email, give us a call, or connect through our contact form, we are here to listen and respond promptly. We value your time and are committed to providing exceptional customer service, so don’t hesitate to contact us today. 

Get In Touch

Contact Sullins Suds

Contact Our Sales Team